1961 - Very large and slow moving Hurricane Carla made landfall near Port Lavaca TX. Carla battered the central Texas coast with wind gusts to 175 mph, and up to 16 inches of rain, and spawned a vicious tornado which swept across Galveston Island killing eight persons. The hurricane claimed 45 lives, and caused 300 million dollars damage. The remnants of Carla produced heavy rain in the Lower Missouri Valley and southern sections of the Upper Great Lakes Region.
More on this and other weather history
Day: Sunny, with a high near 91. Northeast wind around 5 mph.
Night: Mostly clear, with a low around 67. North wind 0 to 5 mph.
Day: Sunny, with a high near 92. North wind 0 to 5 mph.
Night: Mostly clear, with a low around 64. Northeast wind 0 to 5 mph.
Day: Sunny, with a high near 91. East wind 0 to 5 mph.
Night: Clear, with a low around 63. East wind 0 to 5 mph.
Day: Sunny, with a high near 92. Northeast wind 0 to 5 mph.
Night: Mostly clear, with a low around 65. East wind 0 to 5 mph.
Day: Sunny, with a high near 93. Northeast wind 0 to 5 mph.
Night: Mostly clear, with a low around 66.
Day: Sunny, with a high near 94.
Night: Mostly clear, with a low around 66.
Day: Sunny, with a high near 94.
Night: Mostly clear, with a low around 69.
Wed's High Temperature
108 at 4 Miles South Of Tolleson, AZ and Phoenix, AZ and Gila Bend, AZ and 3 Miles East-southeast Of Casa Grande, AZ
Thu's Low Temperature
30 at 22 Miles East Of Provo, UT
Calvert is an unincorporated community and census-designated place (CDP) in Mobile and Washington counties, Alabama, United States. It is located in the extreme northeast corner of Mobile County and southeast corner of Washington County near the Tombigbee River, along U.S. Route 43. As of the 2020 census, the population of Calvert was 255.
German technology conglomerate ThyssenKrupp broke ground on a US$4.65 billion stainless and carbon steel processing facility in Calvert in 2007. The facility became operational in July 2010. ThyssenKrupp's stainless steel division, Inoxum, including the stainless portion of the Calvert plant, was sold to Finnish stainless steel company Outokumpu in 2012. The remaining portion of the ThyssenKrupp plant, with a production capacity of 5.3 million metric tons that includes a hot strip mill, cold roll mill and four coating lines, was purchased by a 50/50 joint partnership of ArcelorMittal and Nippon Steel in February 2014 for $1.5 billion and renamed AM/NS Calvert. At the time, ThyssenKrupp was the region's 2nd largest industrial employer.
Content from Wikipedia, licensed under CC BY-SA 3.0.